Home About Us Distributors and Dealers ToneGrinder Sound Samples Amplifier Configurations FAQ Contact Us Terms and Conditions Privacy Policy |
- S o u n d S a m p l e s - Expanded Output and X100 Series Standard Models
Equipment used to record the sound samples:
Sennheiser e906 Microphone Celestion Vintage 30 Speakers for the JCM-800 and the TriAxis Eminence/Fender Speakers for the Twin Reverb Custom Strat loaded with Joe Barden pickups
Performing Artist: Bill Decker, Santa Rosa, CA www.billdecker.net
The amplifiers used are listed at the top of each block of sound samples. The amplifier settings, Volume, Gain, Tone, etc. were set using the standard issue vacuum tube that came with that amplifier. The settings were not changed when the ToneGrinder tubes were installed. What you are hearing is the actual result of the ToneGrinder model for a particular sound sample. Only the first tube (V1) was changed from the standard vacuum tube to ToneGrinders. All other tube positions had their stock vacuum tubes installed during these recordings. In each of the Sound Sample blocks you will see the ToneGrinder Series in the left box and the four ToneGrinder model buttons to choose each sound sample. The white "Stock" button is the stock vacuum tube sound sample. E N J O Y ! Marshall JCM-800 Rhythm Sample 1
Rhythm Sample 2
Lead Sample
Mesa Boogie TriAxis Lead 2 Red Channel Rhythm Sample 1
Rhythm Sample 2
Rhythm Sample 3
Lead Sample 2
Lead Sample 3
Lead Sample 4
Fender Twin Reverb 100W Reissue Clean Sample 1
Clean Sample 2
Clean Sample 3
Clean Sample 4
Copyright©2009 WattGrinder Engineering™, Inc. All Rights Reserved
|